building a router 4x8 router table with rotary

A place to get answers about which CNC products to look at for your specific application. We have everything from complete controllers in different sizes and in both stepper and servo configurations. A good place to start and get basic answers
Post Reply
Blhutchens
Posts: 1
Joined: Wed Jan 29, 2020 6:58 pm

building a router 4x8 router table with rotary

Post by Blhutchens » Wed Jan 29, 2020 7:31 pm

I am wanting to build or have built a router table with a rotary axis for 3d/2.5 carvings.
Does you software support Aspire if not what post processors do I use to make it work

admin13o5
Site Admin
Posts: 4820
Joined: Tue Sep 03, 2013 5:39 pm

Re: building a router 4x8 router table with rotary

Post by admin13o5 » Thu Jan 30, 2020 7:12 am

We have a POst for Aspire and several customers use it. We have a manual tool change function but most people run the POST with no ATC code so it makes each tool a seperate job. We are considering being a reseller for the Vetrics line of products.

Sedillo
Posts: 1
Joined: Fri Jan 03, 2020 3:41 am

Re: building a router 4x8 router table with rotary

Post by Sedillo » Tue Feb 18, 2020 7:30 am

What would you guys being a reseller for Vetrics products mean for us customers?

admin13o5
Site Admin
Posts: 4820
Joined: Tue Sep 03, 2013 5:39 pm

Re: building a router 4x8 router table with rotary

Post by admin13o5 » Tue Feb 18, 2020 7:06 pm

Only the fact we would be a point of support for the software. We would have access to being a developer using their API for the products and do some custom stuff to make things work better with our hardware and CommandCNC. Their POST is just a simple info file that you can do things with their limited internal varaibles. You can basically make it send specific G and M codes but you cannot do logic , math or assign variables yourself.

Taking on a software package to resell (should) require you to be able to do a certain level of user support and to know how it works with your equipment. Its diferent than just offering a canned POST for a product.

Post Reply

Who is online

Users browsing this forum: waters and 2 guests